DS2000ICLA Launching

The transducer will available in three versions

- Current out in DSUB9 connector as our standard 200 and 400A transducers, but with a calibration winding as standard available in a BNC connector. The calibration winding is used for incircuit calibration and test. The current output version has a liniarity error of maximum 1ppm.

- 1V or 10V output versions available in a BNC connector.

The voltage version has a linearity error of +/- 5ppm and offset trimmed to 10ppm. The temperature stability is developed to be 0,1ppm/K